Using the radio microphone
Using the radio microphone
To establish a transmission link, proceed as follows:
1.Switch the receiver on (see the instruction manual of the receiver).
2.Switch the radio microphone on (see next section).
The transmission link is established and the display backlighting of the receiver changes from red to orange.
It is vital to observe the notes on frequency selection on page 27.
If you cannot establish a transmission link between transmitter and receiver, read the chapter “Synchronizing the radio microphone with a receiver” on page 27.
Switching the radio microphone on/off
To switch the radio microphone on (online operation):
ON/OFF Briefly press the ON/OFF button .
The red ON LED lights up. The “Frequency/Name” standard display appears on the display panel. The transmission icon is displayed. The radio microphone transmits an RF signal.
To switch the radio microphone on and to deactivate the RF signal on
ON/OFF Keep the ON/OFF button pressed until “RF Mute On?” appears on the display panel.
12