Adjusting settings via the operating menu

The extended menu “Advanced Menu“

Setting the transmission frequencies and the frequency banks “U1” to “U6” – “Tune”

When you have selected one of the system banks and then select the “Tune” menu, the radio microphone automatically switches to channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly appears on the display panel.

Upon delivery, the channels of the frequency banks “U1” to “U6” are not assigned a transmission frequency.

When you are in the “Tune” menu item, the RF signal is deactivated.

Via the “Tune” menu item, you can:

1.set a transmission frequency to be stored in the current channel of the frequency bank (“U1” to “U6”)

2.or select a frequency bank (“U1” to “U6”) and a channel and assign this channel a transmission frequency.

It is vital to observe the notes on frequency selection on page 27.

Setting a transmission frequency for the current channel

 Move the multi-function switch until the “Tune” menu item appears.

 Press the multi-function switch. The frequency selection appears.

 

Advanced Menu

 

 

 

 

 

Tu n e

 

 

 

 

 

 

Tune

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tune

 

 

 

 

 

543.200 MHz

 

 

 

 

 

 

 

543.200 MHz

 

 

543.200 MHz

 

 

 

 

 

B.Ch:

U1

. 1

 

 

 

 

 

 

 

B.Ch: U1.

1

 

Call up “Tune”

 

 

 

 

Select the frequency

 

 

 

 

 

Select the channel;

 

(special function)

 

 

 

 

bank and confirm

 

 

 

 

 

store the setting

 

“Stored”

Set the desired frequency.

 Press the multi-function switch. Your settings are stored.

You are back to the operating menu.

24