Using the radio microphone

You can switch the radio microphone on and deactivate the RF signal on switch-on. For more information, see next section.

To switch the radio microphone off:

If necessary, deactivate the lock mode (see next section).

ON/OFF  Press the ON/OFF button ￿ until “OFF” appears on the display panel. The red ON LED ￿ and the MIC button ￿go off. The display panel turns off.

When in the operating menu, pressing the ON/ OFF button ￿ cancel your entry (ESC function) and return you to the current standard display.

To switch the radio microphone on and to deactivate the RF signal on switch-on(offline operation):

ON/OFF  Keep the ON/OFF button pressed until “RF Mute On?” appears on the display panel.

 Press the multi-function switch.

The transmission frequency is displayed but the radio microphone does not transmit an RF signal. The transmission icon ￿ is not displayed. The MIC button ￿ goes off. When the pilot tone function is activated on both radio microphone and receiver, “RF Mute” appears on the receiver’s display panel.

531.375MHz ￿ ew300 G3

AF P MUTE

Use this function to save battery power or to prepare a radio microphone for use during live operation without causing interference to existing transmission links.

To activate the RF signal:

ON/OFF  Briefly press the ON/OFF button ￿.

“RF Mute Off?” appears on the display panel.

 Press the multi-function switch.

The transmission icon ￿ is displayed again.

13