Daily Checks, Hydraulic Pressure Check | Servis-Rhino 1480, 1485

Models: 1495 1485 1480

MAINTENANCE

Daily Checks

Regular maintenance of your loader and hydraulic system will insure maximum loader efficiency and long life.

1.Check fluid level of tractor hydraulic system before starting each days operation. If necessary, add hydrau- lic oil as recommended in your tractor operators manual.

2.Inspect all pivot pins for wear. Make certain cotterpins are installed to retain each pivot pin.

3.Check all bolts for tightness.

4.Lubricate all grease fittings.

5.After every ten hours of operation, check all hardware and tighten where required.

6.Inspect hydraulic lines and fittings for wear and leaks. Replace hoses immediately if they are damaged by a cut or scrape, extruded at the fittings or leaking. Hydraulic oil leaks should be repaired promptly to avoid loss of oil and serious personal injury from escaping oil.

7.During operation, listen for abnormal sounds which might indicate loose parts or other damage.

8.Clean all debris from machine.

Hydraulic Pressure Check

Following procedure outlines hydraulic pressure check.

1.Obtain a pressure gauge that measures 3000 PSI in 50 PSI increments.

2.Install gauge into the hydraulic line connecting the loader valve and to the base port of bucket cylinders.

3.Start engine and adjust to 1700-2200 RPM.

4.Push bucket control lever to pressurize the hydraulic line with the gauge attached. Hold the control until the cylinders reach the fully extended position. Holding the control with cylinders fully extended will give you the hydraulic system pressure on the gauge.

5.If pressure is not correct, refer to “TROUBLESHOOTING” Section for possible remedy or contact your dealer.

Escaping hydraulic fluid under pressure can penetrate skin, causing serious personal injury.

•DO NOT use your hand to check for leaks. Use a piece of wood or cardboard and wear eye protection to search for leaks.

•Stop engine and relieve pressure before connecting or disconnecting lines.

•Tighten all connections before starting engine or pressurizing lines.

NOTE: If any fluid is injected into skin, obtain medical attention immediately or gangrene may result.

1480/1485/1495 01/11

Maintenance Section 5-5

MAINTENANCE

1495, 1485, 1480 specifications

The Servis-Rhino 1480, 1485, and 1495 models are renowned in the industry for their rugged build and exceptional performance in the field of land management and agricultural operations. These innovative machines represent the pinnacle of design and engineering, catering to the diverse needs of farmers and landowners.

One of the standout features of the Servis-Rhino series is their robust construction. Built with high-quality materials, these models ensure durability and longevity, even in the harshest environments. The heavy-duty frames provide stability and support, making them ideal for intensive tasks such as brush clearing, pasture maintenance, and roadside clean-up.

In terms of technology, Servis-Rhino has incorporated advanced features that enhance ease of use and efficiency. The models come equipped with a patented blade design that promotes optimal cutting performance, allowing users to tackle thick brush and dense vegetation with ease. Additionally, their adjustable cutting heights make them versatile for various tasks, enabling operators to customize their settings based on specific requirements.

The hydraulic system integrated into the 1480, 1485, and 1495 models offers smooth and responsive operation. This feature is particularly beneficial for users who need to perform quick adjustments while working, as it minimizes downtime and maximizes productivity. The hydraulic lift capabilities further enhance efficiency by allowing operators to raise and lower the cutting equipment with minimal effort.

Another significant characteristic of these models is their compatibility with a range of tractors, thereby increasing their appeal to a broader audience. The quick-attach design ensures that users can easily connect the machines to different tractor types, reducing the need for specialized equipment and making them a valuable addition to any fleet.

Moreover, the Servis-Rhino models emphasize user comfort and safety. They often feature ergonomic controls that streamline operation and reduce fatigue during long working hours. Safety guards and shields are also included to protect operators from flying debris, ensuring that the machines can be operated safely in various environments.

In summary, the Servis-Rhino 1480, 1485, and 1495 models are designed to meet the rigorous demands of modern agricultural and land management tasks. With their sturdy construction, advanced technology, hydraulic efficiency, and user-friendly features, these machines are an indispensable tool for anyone involved in land maintenance, making them a top choice among professionals in the field.