OPERATION

Arrange the chains so that when tightened, the chains are pulling downward and against themselves. Carefully tighten the securing chains or other fasteners using boomers or binders to apply maximum tension. Use extreme care when attaching and removing the securing devices as the extreme tension involved when released has the potential to inflict serious injury.

While hauling the tractor and implement, make occasional stops to check that the tractor and implement have not moved or shifted and that the securing chains have maintained tension. If during transport a hard braking, sharp turning, or swerving action was performed, stop at the next safe location to inspect the security of the load. OPS-U- 0026

12. TROUBLESHOOTING GUIDE

A.HYDRAULIC CYLINDER NOT WORKING - Check level of hydraulic fluid (see sight gauge on tank). Check to see if pump is functioning properly by attempting to use another cylinder or pressure gauge. If pump is working properly, check the pressure on the line. The relief valve may be by-passing fluid at too low pressure. If cylinder is still not functioning properly, check the line for stoppage. The pistons in hydraulic cylinders are virtually trouble-free, but occasionally one will have a scored wall and allow oil to flow around the piston. In this case, replace the cylinder.

NOTE: Refer to repair parts section on valve bank settings on individual relief cartridges.

B.HYDRAULIC MOTOR NOT WORKING - Check lines for kinks or pinched place. If motor is “bogging down” under load, recheck the relief valve setting on the cutter valve - 2500 PSI.

C.HYDRAULIC VALVE - Failures in the hydraulic system are almost always caused by other elements in the system other than the valve; so the entire system should be checked before valve is changed. A malfunction in any hydraulic valve section will require replacement of that section (but not the replacement of the valve bank) since the insides are honed to fit individually. Attachment such as the relief valves and detents may be serviced individually.

D.STRUCTURAL MEMBERS - Failure in structural members generally results from rough treatment. While they are constructed to withstand abuse, they cannot be made strong enough to withstand abnormal abuse. The factory does not warrant these parts to any extent other than in normal use in grass, weeds, brush, small bushes, and small trees which the unit is designed to cut.

2160 02/10

Operation Section 4-39

© 2010 Alamo Group Inc.

OPERATION

Page 136 Page 138
Page 137
Image 137
Servis-Rhino 2160 manual Troubleshooting Guide
Page 136 Page 138

2160 specifications

The Servis-Rhino 2160 is a robust and versatile rotary cutter designed for land management and maintenance tasks. Known for its durability and efficiency, the 2160 is an essential tool for farmers, landscapers, and land maintenance professionals.

One of the standout features of the Servis-Rhino 2160 is its heavy-duty construction. Built with a rugged steel frame, the cutter is designed to withstand severe conditions and continuous use. This durability ensures that it can handle tough grasses, weeds, and brush, making it ideal for rough terrain and challenging environments.

In terms of cutting performance, the 2160 is equipped with high-quality, heat-treated blades. These blades are engineered to provide exceptional cutting capability while minimizing wear and tear. The innovative design allows for precision cutting at varying heights, enabling users to achieve a clean finish on various types of vegetation.

The Servis-Rhino 2160 also incorporates advanced technology for ease of use and improved productivity. It features a user-friendly hitch system that allows for quick attachment and detachment, making it easy to switch between tasks. Additionally, the cutter is compatible with a wide range of tractors, ensuring versatility across different equipment settings.

Another significant characteristic of the 2160 is its adjustable cutting height. This feature allows operators to set the desired height based on the specific job requirements, enhancing the tool’s flexibility. Whether tackling overgrown fields or maintaining manicured lawns, users can achieve optimal results with ease.

Moreover, the 2160 is designed with operator safety in mind. It includes safety chains and shields to protect users from debris and enhance overall operational safety. The thoughtful design minimizes risks associated with rotary cutters, making it a reliable choice for operators.

Maintenance is streamlined with the Servis-Rhino 2160, as it features easily accessible grease points and removable blades. This ensures that upkeep is straightforward, allowing users to focus on their work without the hassle of complex maintenance routines.

In conclusion, the Servis-Rhino 2160 stands out in the market for its heavy-duty construction, high-performance cutting capabilities, and advanced user-centric design. With its combination of durability, versatility, and safety features, it is an invaluable asset for anyone involved in land management and maintenance tasks. Whether for agricultural use or landscaping projects, the 2160 provides exceptional reliability and performance that meets diverse needs.
Top Page Image Contents