OPERATION

1.Standard Equipment and Specifications

Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given for a loader equipped with 72” HD material bucket, quick attach device and 4-bar linkage, operated with an average tractor hydraulic system of 16.5 GPM with engine operating at 2300 RPM and control valve relief setting of 2900 PSI.

Breakaway Capacity

 

At Pivot Point

5790 lbs.

800mm Forward of Pivot Point

3875 lbs.

Lift capacity at Full Height

 

At Pivot Point

3065 lbs.

800mm Forward of Pivot Point

2085 lbs.

Raising Time

4.40 sec.

Lowering Time

3.30 sec.

Attachment Dumping Time

3.40 sec.

Attachment Rollback Time

2.30 sec.

Weight with HD Material Bucket

1883 lbs.

Lift Cylinder:

 

Stroke

19.72 in.

Piston Diameter

2.75 in.

Rod Diameter

1.50 in.

Bucket Cylinder:

 

Stroke

21.69 in.

Piston Diameter

2.50 in.

Rod Diameter

1.38 in.

A. Maximum Lift Height at Pivot Pin

131 in.

B. Maximum Height Under Bucket

123 in.

C. Clearance with Bucket Dumped

97 in.

D. Reach at Maximum Height

35 in.

E.

Maximum Dump Angle

60°

F.

Reach with Attachment on Ground

83 in.

G.

Attachment Rollback Angle

40°

H.

Digging Depth

4 in.

I. Overall Height in Carry Position

67 in.

(Manufacturers estimated specifications and design subject to change without notice.)

4211B 02/10

Operation Section 4-3

© 2010 Alamo Group Inc.

OPERATION

Page 49
Image 49
Servis-Rhino 4211B manual Standard Equipment and Specifications