Style 484
Thank you for purchasing a Shakespeare antenna product. Customer comments are welcome. Before installing, please study the diagram and check parts supplied against those listed.
IMPORTANT! Please read all instructions before installing.
The Style 484 Wall Mounting Bracket is a simple device for mounting antennas and masts to a vertical or horizontal surface.
Tools required: Drill, drill bit, pliers or wrench, screwdriver
Other materials required: Stainless steel mounting hardware that is appropriate to the mounting surface
Installation Instructions
Choose a mounting location that is as high as possible, as free as possible of obstructions, and as far as possible from other antennas.
1. Assemble the four clamp halves to the antenna’s mounting sleeve, | |
| or to the mast you are mounting. Position one clamp at the bottom |
| of the mounting sleeve and the other clamp at the top of the |
| sleeve. The clamps should be at least one foot apart. |
2. | Hold the antenna against the mounting surface and mark the |
| location of the mounting holes, using the clamps as a template. |
3. | Drill holes according to the size of the mounting screws or bolts |
| (not supplied) to be used. Be sure to use only stainless steel |
| hardware. When drilling fiberglass, use wood boring bits, not |
| metal drilling bits, and use a backup wooden block underneath the |
| surface to reduce |
4. | Disassemble the clamps from the antenna and securely fasten the |
| clamp halves to the mounting surface. |
Supplied Parts
4 | Clamp halves |
4 | Bolts |
4 | Nuts |
4 | Lockwashers |
Clamp
Lockwasher
Bolt
Nut
Antenna mast
Clearance for 1/2” dia. bolt
or screw (not supplied)
1/4” min, each clamp
Important: If the thickness of the mounting surface is not |
adequate to support the strain, use a wooden or metal backup pad |
(not supplied) underneath the surface during installation. |
5. Reposition the antenna mounting sleeve in the clamps and tighten |
securely. The clamp halves must remain a minimum of 1/4” apart |
when the installation is complete. |
Antenna mast
Mounting screw (not supplied)
Clamp
Mounting 
surface
Shakespeare Electronic Products Group
U.S. Operations: 6111 Shakespeare Rd. · Columbia, SC 29223 ·
U.K. Operations: Enterprise Way, Fleetwood, Lancashire, FY7 8RY, England · +44 (0) 1253 858787 · Fax: +44 (0)
©1994, 2007 Shakespeare Co. | · Form | Shakespeare is a subsidiary of Jarden Corporation (NYSE: JAH) |
