Shark HPB-3520, HPB-2011, HPB-4020, HPB-3530 manual Use this product only in a well ventilated area

Models: HPB-3530 HPB-2011 HPB-4020 HPB-3520

1 56
Download 56 pages 46.03 Kb
Page 5
Image 5
WARNING
PROTECTIVE
EYEWEAR AND
CLOTHING MUST
BE WORN.
WARNING
RISK OF
ASPHYXIATION.
USE ONLY IN A WELL VENTILATED AREA.
WARNING
RISK OF FIRE.
DO NOT ADD FUEL WHEN OPERATING MACHINE.

IMPORTANT SAFETY INFORMATION

WARNING: High pressure spray can cause paint chips or other particles to become airborne and fly at high speeds.

9. Eye, hand and foot safety de- vices must be worn when us- ing this equipment.

WARNING: Risk of asphyxiation

— Use this product only in a well ventilated area.

10.When the machine is working, do not cover or place in a closed space where ventila-

tion is insufficient.

WARNING: Risk of fire. Do not add fuel when the machine is operating or still hot.

11.Machines with a spray gun should not be operated with the spray gun in the off posi-

tion for extended periods of time as this may cause dam- age to the pump. Check to

make sure burner shuts off when spray gun trig- ger is closed.

12.Protect from freezing.

13.To prevent a serious injury, make certain quick cou- pler on discharge hose has locked before using pressure washer.

14.Do not allow acids, caustic or abrasive fluids to pass through the pump.

15.Inlet water must be cold and clean fresh water.

16.Do not allow CHILDREN to operate the pressure washer at any time. THIS MACHINE MUST BE

ATTENDED DURING OPERATION.

17.The best insurance against an accident is precau- tion, and knowledge of the machine.

18.Do not operate this product when fatigued or un- der the influence of alcohol or drugs. Keep operat- ing area clear of all persons.

19.We will not be liable for any changes made to our standard machines, or any components not pur- chased from us.

20.Do not overreach or stand on unstable support. Keep good footing and balance at all times.

21.Follow the maintenance instructions specified in the manual.

22.When making repairs disconnect from electrical source.

23.Before disconnecting high pressure hose from hot water outlet, turn off burner to allow water to cool to 100°F, then turn off pump motor and water supply and operate spray gun to relieve back pres- sure in hose. This will prevent coil damage from thermal expansion.

CAUTION: This machine produces hot water and must have insulated components attached to pro- tect the operator.

CAUTION: Inspect rupture disc and pressure relief devices annually for any obstruction.

PRESSURE WASHER OPERATOR’S MANUAL

5

97-6068, 97-6131 • REV. 3/06

Page 5
Image 5
Shark HPB-3520, HPB-2011, HPB-4020, HPB-3530 manual Use this product only in a well ventilated area