TOLL FRE E: 1-8 00-798-7 398
FILL
4 Lay the mop on the floor or on
a counter top and remove the
water tank cap by turning co unter
clockwise. Fill the water t ank using
the filling flask. Do not over fill the
water tank. Replace the wa ter cap
and tighten.
IMPORTANT: Make sure your floor s
are sealed. Before usi ng the Steam
Mop consult page 3 for mor e
information.
Quick Start
2
4
When assembling your s team mop
there may be a little water in or aro und
the water tank. This is bec ause we test
all our steam mops 100 % before you
buy them, so you get a qualit y
Shark® Steam Mop.
3
1
ASSEMBLE
1 Inser t the mop handle into the
pump actuator (the tube th at leads
to the tank). Push the mop han dle
and pump actuator togeth er in
until you hear it click into plac e.
2 Select a mop head and cleaning
pad. Choose from the Rectangle or
Triangle mop head. Fit one side of
the pocket onto the head first, then
using the lavender loop, pull the
pocket over the head. Attach the
quick fasteners on the top of the
pocket to secure in place.
3 Snap the mop head into the ba se to
secure it. Press the relea se button
to exchange mop heads.