USAGE SUGGESTIONS FOR YOUR SUPER STEAMER
CAUTION: This appliance must be unplugged from the electrical outlet and allowed to cool down before all cleaning and maintenance tasks.
•Let the appliance cool down completely before cleaning or storing.
•Empty all water from the water tank after each use.
•Store in a dry, cool place.
•A periodic rinse of your steam cleaner will free it from deposits. This is recommended every
Cleaning the Nozzles:
Your steamer should not normally require cleaning, however, should you notice a marked decrease in steam output it may be necessary to remove mineral deposit
1.Unplug steam cleaner from wall outlet.
2.Use a small diameter stiff metal wire such as a straightened metal paperclip and carefully insert the end of the wire into the nozzle orifice. See illustration below.
3.Move wire back and forth several times to remove any deposits.
4. | Reconnect appliance to power outlet, switch on and note steam output. |
5.If steam performance does not improve, repeat steps #1 through #4.
9
ADDITIONAL IMPORTANT SAFEGUARDS cont.
1.To avoid circuit overload, do not operate another appliance on the same socket (circuit)
2.If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange cord so that it cannot be pulled or tripped over.
3.Do not leave unattended when the system is connected to a power supply/electrical outlet.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WARNING: This appliance is equipped with a
purpose of the grounding pin, part of the
2
