Shark SV7729 Parts And Components, Assembly, Using Your Cordless Vacuum, Operating Instructions

Models: SV7729 SV7729N

1 4
Download 4 pages 53.78 Kb
Page 3
Image 3
PARTS AND COMPONENTS

OPERATING INSTRUCTIONS

PARTS AND COMPONENTS

Assembly

Note: Dust cup filter must always be used when operating the hand vacuum.

1.To open the dust cup compartment, push the dust cup release button and remove the dust cup container. (Fig. 2)

Dust Cup Release Button

Fig. 2

2.Verify that the dust cup filter is inside, then re-attach the dust cup container to the hand vacuum. (Fig. 3)

Fig. 3

3.To attach the crevice tool or the dusting brush to the hand vacuum, push the attachment into the suction hole in the front of the dust container. (Fig. 4 & Fig. 5)

Fig. 4

Fig. 5

CAUTION: The suction inlet must be open and free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.

Using Your Cordless Vacuum

1.Unplug unit from charger.

2.To start the unit, slide the "On/Off" switch to the "On" position.

3.To stop the vauum cleaner, slide the "On/Off" switch to the "Off" position.

4.A crevice tool is provided for cleaning narrow, hard to reach places. A dusting brush is provided for cleaning upholstery, furniture, etc.

Changing & Cleaning the Dust Cup Filter

To achieve the best performance, empty the dust cup container and clean the dust cup filter after each use.

1.To remove the dust cup container, press down on the dust cup release button and pull off the dust cup container.

2.Pull out the dust cup filter.

3.Empty the dust from the dust cup container. (Fig. 6)

Fig. 6

4.Rinse the dust cup filter in cold water, and then wait until it dries completely before replacing it back into the dust cup container. Do not use a washing machine to clean the dust cup filter. Do not use a hair dryer to dry it. Air dry only.

5.Replace the dust cup filter carefully into the dust cup compartment. NEVER operate vacuum cleaner without dust cup filter in place.

6.Attach the dust cup container to the cordless vacuum.

Note: It is recommended that the dust cup filter be replaced every three (3) months to ensure peak performance of the unit.

1.Dust Cup Container

2.Dust Cup Filter

3.Dust Cup Release Switch

4.Charging Indicator

5.On/Off Switch

6.Main Unit

7.Charging Adapter

8.Crevice Tool

9.Dusting Brush

NOTE: Your cordless vacuum is shipped with the batteries uncharged. Charging of the unit for 20 hours prior to first use is required.

5

2

Page 3
Image 3
Shark SV7729N Parts And Components, Assembly, Using Your Cordless Vacuum, Changing & Cleaning the Dust Cup Filter