Adjust the picture size and focus
Refer to “Image Projection” in the projector operation manual for information on adjusting the
focus and picture size.
Handling Precautions
●Do not disassemble this lens.
Please refer to your authorized dealer for any maintenance and inspections requiring an open
cabinet.
●Touching any other internal part could cause personal injury or machine malfunction.
●Do not touch any glass or protruding part of the lens. This may cause personal injury
and reduced performance of the projector.
●When maintaining the projector the following points should be noted.
•When cleaning the lens be sure to use a commercial air blower or lens cleaning paper (used
in cleaning glasses and cameras).
•The surface of the lens is very delicate. Do not allow hard objects to bump or rub against it.
Caution
●
Be sure not to attach this lens to the projector when storing or carrying the projector. This
may cause damage to them.
Supplied Accessories
•Lens cover (inside rubber ring) – 1 •Lens securing screws – 3
•Lens cap (front) – 1 •Lens cap (rear) – 1
•Installation manual •Operation manual (this manual)
Specifications
Product type Fixed wide lens for projector
Model AN-PH10EX
Type of lens Fixed lens
Picture size (diagonal) 80'' to 150'' (4:3)
Focal length 11.6 mm (15/32'')
F no. 2.5
Throw ratio 1:0.8
Weight Approx. 2,700 g (5.95 lbs.)
Dimensions of lens ø104 × 322.8 mm (12 23/32'') (main body only)
Depth of projector with 558.9 mm (22 1/64'') – 563.1 mm (22 11/64'')
the lens attached
2
AN-PH10EX_Lens_E.p65 04.12.24, 3:06 PM2