Item
POWER SAVE DELAY TIME
PERSONALITY
USB
NETWORK
PS PROTOCOL
CLEARABLE WARNING
AUTO
CONTINUE
MANUAL
TIMEOUT
WAIT TIMEOUT
System Configuration Menu
The default settings are bold.
Value | Description |
5 min; 15 min; 30 min; | Sets the time before printer enters |
60 min; 240 min. | power save mode. |
Auto emulation; | Selects the printer emulation |
PCL; IBM PPR III XL; | language. Note: the only printer |
Epson FX; Adobe | languages that can be selected are |
PostScript | those enabled in the Personality |
| section of the Maintenance |
| menu. |
ASCII | Specifies PostScript (PS) |
RAW | communication protocol mode of |
| data from USB. (In RAW mode, |
| |
ASCII | This Item displays only when the |
RAW | network card is installed. |
| Specifies PS communication |
| protocol mode of data from the |
| network card . |
| (In RAW mode, |
On; Job | PCL emulation: Sets the time before |
| deleting error messages. If changed |
| to Job, error remains displayed until |
| next print job is received. |
| PS emulation: Error messages are |
| only shown during job regardless of |
| setting. |
On; Off | Sets the printer to automatically |
| recover after a memory overflow or |
| print overrun. |
60 sec; 30 sec; Off | This parameter sets the period of |
| time, that after requesting paper to |
| be inserted and is not inserted, |
| when the print job is cancelled. |
| Only works in PostScript mode. |
Off; 5 sec to 300 sec; | Sets the time between receiving the |
default = 40 sec | last byte of data and the page being |
| automatically ejected. |
| Only works in PCL mode. |
| In PS mode the job will be |
| cancelled. |
Sharp