Item
FONT
SOURCE
FONT NO.
FONT PITCH
FONT HEIGHT
PCL Emulation Menu
The default settings are bold.
Value | Description |
Resident; DIMM0; | Selects location of the PCL font |
Downloaded | used. |
| DIMM0 is displayed only when font |
| DIMM ROM exists in the slot. |
| Downloaded only appears if fonts |
| have been down loaded to the |
| printer. |
I000, C001, S001 | Sets the PCL font number. |
| I = internal (resident font); I000 = |
| Courier. |
| C = Font stored in the printer's Flash |
| memory. |
| S = downloaded soft font, stored on |
| the printer's internal hard disk drive. |
| Applies only to printers with a hard |
| disk drive installed. |
0.44 cpi to 99.99 cpi in 0.01 | Sets the font width in characters per |
cpi increments | inch. Only displayed if the font is a |
Default = 10.00 cpi | fixed spacing outline font. |
4.00 to 999.75 point, in 0.25 | Sets the font point size. Applies only |
point increments | to fixed fonts (does not apply to |
Default = 12.00 point | proportional fonts). |
Sharp