Store To Hard Disk
NOTES
•The internal hard disk must be installed in the printer and enabled to allow for spooling of the print job before final printing.
•If the hard disk memory is insufficient for the spooled data, DISK FULL is displayed and only one copy printed.
•If the software application being used has a collate print option, this must be turned OFF for store to hard disk to operate correctly.
•Store to hard disk may not be available in some software applications.
Using Store to Hard Disk
1.Select Store to HDD.
2.Enter a job name of up to 16 characters under Job Name and a four digit personal ID number.
3.Click Print to proceed with your print job. The document will be stored on the printer’s hard disk.
4.The document can then be printed or deleted using the procedures given below.
Printing s document stored on the hard disk
MENU ITEM VALUE SELECT
0 | 1 | 2 | 3 |
ON LINE |
|
| CANCEL |
4 | 5 | 6 | 7 |
1.Press the MENU button to access the PRINT JOBS MENU and press the SELECT button.
2.Use the numbered buttons on the control panel to enter the personal ID number you set above.
Sharp