34
SETUP IN A MACINTOSH ENVIRONMENT
INSTALLATION IN MAC OS 8.6 TO 9.2.2
1Insert the network expansion kit
"Software CD-ROM (1)" into your
computer's CD-ROM drive.
2Double-click the [CD-ROM] icon ( )
on the desktop.
3Double-click the [MacOS] folder.
4Double-click the [Installer] icon ( ).
The installer window will appear.
5Click the [Install] button.
6The License Agreement window will
appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
7Read the message in the window that
appears and click the [Continue]
button.
Installation of the PPD file begins.
After the installation, a message prompting you to
restart your computer will appear. Click the [OK]
button and restart your computer.
This completes the installation of the software.
INSTALLING THE SCREEN FONTS (MAC OS 8.6 - 9.2.2)
Macintosh screen fonts are contained in the [Font] folder of the "PRINTER UTILIT IES" CD-ROM that accompanies
the PS3 expansion kit (AR-PK1/N). The screen fonts are installed by copying the required screen font suitcase
folders to your Macintosh.
Copy the screen fonts to the following folder:
•Mac OS 8.6 to 9.2.2 : [Fonts] folder in the [System Folder]
If you are using Mac OS 8.6 to 9.2.2, make sure that "LaserWriter8" has been installed and that the
"LaserWriter8" checkbox is selected ( ) in "Extensions Manager" in "Control Panels". If not, install it from the
system CD-ROM supplied with your Macintosh computer.
If you experience problems that may be due to the installed screen fonts, immediately delete the copied font
suitcase folder from the system.
Note
Note