Sharp AR-M230, AR-M270 Client settings

2PRINTER SHARING

CONTENTS INDEX

Client settings (part 1)

Follow the procedure below to install the printer driver in the client.

1Click the "start" button, and click "Control

Panel".

In Windows 95/98/Me/2000, click the "Start" button and

select "Settings".

2Click "Printers and Other Hardware", and click

"Printers and Faxes".

In Windows 95/98/Me/2000, click "Printers".

3Click "Add a printer" in "Printer Tasks".

In Windows 95/98/Me/2000, double-click the "Add

Printer" icon.

The "Add Printer Wizard" will appear.

4Click the "Next" button.

5Select "A network printer, or a printer attached

to another computer", and click the "Next"

button.

In Windows 95/98/Me/2000, select "Network printer"

and click the "Next" button.

If your operating system is Windows NT 4.0, refer to "Settings in Windows NT 4.0".

Note

Contents

Main Introduction Trademark Acknowledgments How to use the online manual How to Control the Online Manual Following Links Using Bookmarks How to Print Out This Manual Contents Basic printing 1 2 3 4 Basic printing 5 Windows 95/98/Me/NT 4.0). When "Paper Selection" is set to "Auto Select" When "FORCED OUTPUT OF PRINT" is disabled Basic printing When the "Paper Selection" setting is "Paper Source" or "Paper Type" You selected a "Paper Type", but the selected type of paper is not loaded in the machine. Opening the printer driver from the "start" button Windows 2000/XP 1 2 3 Printer driver settings Two-sided printing Printing multiple pages on one page Fitting the printed image to the paper 1 3 2 4 Rotating the print image 180 degrees Printing a watermark How to Print a Watermark Stapling printed pages (when a finisher is installed) Giving priority to a print job 1 2 highlighted. 3 touch the key of the job that you wish to print immediately. Canceling a print job 1 2 highlighted. 3 printed appear. Touch the key of the job that you wish to cancel. Sharing the printer using windows networking Shared printer settings On the computer to which the machine is directly connected 1 2 3 4 5 Client settings 1 2 3 4 5 Client settings 6 9 7 8 Client settings Settings in Windows NT 4.0 1 2 3 Troubleshooting Printing does not take place Improper printing operation Print quality is not satisfactory If a Notice Page is printed Uninstalling the printer driver Printing does not take place Check the connections Printing does not take place Check Your Computer Is there enough computer memory or hard disk space? Printing does not take place Check the machine Power switch on? Is the machine online? Copy job being performed? Printing does not take place Checking the printer driver Has the printer driver been installed properly? Is your machine selected correctly in the current application for the print job? Is the port configured correctly? Improper printing operation Printing is slow Two-sided printing is not possible Stapling is not possible (when a finisher is installed) Print quality is not satisfactory Check the paper being used Print quality is not satisfactory The printed image is coarse Has the printer driver been specified to suit both paper and the print job? The printed image is distorted Is the paper loaded correctly? If a Notice Page is printed If a Notice Page is printed When the Staple function is not selected: When the Staple function is selected: Disabling notice page printing Uninstalling the printer driver 1 2 3 4 Printer specifications 5 Index