Sharp AR-M276, AR-M236 Automatically, or copying does not, Original is not a standard size

TROUBLESHOOTING AND MAINTENANCE

Problem		Cause and solution	Page
	The document cover/RSPF was not opened completely
	when the original was placed on the document glass.		-
	→	Open the document cover/RSPF completely, place the original on
		the document glass, and close the RSPF.
	The original contains large black solid areas.
Original size is not selected	→ If the original contains any large black solid areas, the original		47
		size may not be detected automatically. Use the [SPECIAL
automatically, or copying does not		MODES] key to select the original size.
take place on paper that matches
	The original is smaller than A5 (5-1/2" x 8-1/2") size.
the original size.	→ When the original is smaller than A5 (5-1/2" x 8-1/2") size, the		22
		size cannot be detected. Use the [PAPER SELECT] key to select
		the desired paper size.
	The original is not a standard size.
	→ When the original is not a standard size, the size cannot be		22, 47
		detected. Manually select the closest standard original size, or
		use the [PAPER SELECT] key to select the desired paper size.
	A copy, print job, or received fax is being printed.		-
	→	Set the correct paper size after printing is finished.
	Operation has temporarily stopped because the tray is
	out of paper or a misfeed occurred.		19, 63
	→	Load paper or remove the misfeed, finish the copy job, and then
		set the paper size.
Paper size for a paper tray cannot
	During an interrupt copy job.		34
be set.	→	Set the correct paper size after the interrupt copy job is finished.
	Misfeed occurs.		63
	→	Remove the misfed paper.
	Paper tray settings are prohibited in the key operator		Key
	programs.
			operator’s
	→	Change the setting in the key operator programs to permit paper
			guide
		tray settings.
	The originals were placed in the wrong order.
Order of copies is incorrect.	→ When using the document glass, scan the originals one sheet at		23
		a time beginning from the first page. When using the RSPF, insert
		the originals with the first page on top and facing up.
	The memory become full while the originals were
	being scanned.
The job is cancelled after the	→ When using a function such as pamphlet copy or multi shot copy		78
		where all original pages are scanned into memory before copying
originals were being scanned.
		begins, scanning will stop and copying will not take place if the
		memory becomes full. The number of pages that can be scanned
		into memory can be increased by installing more memory.
	The memory become full while the originals were
	being scanned.
	→ When the memory becomes full while the originals are being
Not all pages are copied.		scanned, you can select whether you want to continue the job	-
		and print only those originals that were scanned, or cancel the
		job. If you continue the job, copies will only be made of the
		originals that were scanned, and thus all originals cannot be
		copied at once.
The RSPF cannot be used.	Use of the RSPF has been prohibited in the key		Key
	operator programs.		operator’s
	→ Enable use of the RSPF in the key operator programs.		guide
	The same power outlet is used for the lighting fixture
Lighting fixture flickers.	and the machine.		4
	→	Connect the machine to a power outlet which is not used for other
		electric appliances.

60