Sharp BD-HP210U Communication Setup, IP address and port number of the proxy server

6

7

Next

Address Port

Yes

No

Enter your DNS address.

Primary

Secondary

Next

• The primary and secondary DNS addresses are entered using the screen for inputting characters. (See page 41.)

Regarding each of the setup values, confirm the specifications of your broadband router.

8 Select “Next”, then press ENTER.

9 For setting the proxy server, press c/d to select “Yes” or “No”, then press ENTER.

Do you use the proxy server?

Select “Next”, then press ENTER. Enter your DNS address.

IP Address Netmask Gateway

Next

• If selecting “Yes”: The IP address is automatically obtained. (Go to the step 9.)

• If selecting “No”: The IP address, netmask and gateway are manually entered using the screen for inputting characters. (See page 41.)

Regarding each of the setup values, confirm the specifications of your broadband router.

Yes

No

5 For setting the IP address, press c/d to select “Yes” or “No”, then press ENTER.

Do you obtain the IP address automatically?

SETTINGS

Communication Setup

This allows you to perform and/or change the communication setting. This setting is required to use BD-LIVE functions that connect to the internet.

NOTE

•Make sure that the LAN cable is connected to this Player. (See page 18.)

•For manually performing the setting, the following information of the connected router or modem is required. Confirm the information prior to the setting.

−IP address, netmask, gateway, DNS address

•Besides, if specifying a proxy server, the following information specified from your internet service provider is also required. Confirm the information prior to the setting.

−IP address and port number of the proxy server

1Press SETUP to display the Setup Menu screen.

2Press a/b/c/d to select “Settings”, then press ENTER.

3Press a/b to select “Communication Setup”, then press ENTER.

4Press c/d to select “Change”, then press

ENTER.

Current Ethernet setup info.

IP Address	: Auto Setup
Netmask	: Auto Setup
Gateway	: Auto Setup
DNS	: Auto Setup
Proxy	: Not Use
Change		Initialize

•For initializing the current setting, select “Initialize”, then press ENTER.

Settings

•If selecting “Yes”: The IP address or proxy server name and port number for the proxy server specified from your internet service provider are entered using the screen for inputting characters. (See page 41.)

•If selecting “No”: Go to the next step.

(Continued on the next page)

39