Sharp BQC-PGM10X//1 operation manual Usage Guidelines, For SHARP Assistance U.S.A. only

Models: BQC-PGM10X//1

1 9
Download 9 pages 16.93 Kb
Page 1
Image 1
Usage Guidelines

Caution Concerning the Lamp UnitUsage Guidelines

Preparations

Basic Information &

BQC-PGM10X//1

Caution Concerning the Lamp Unit

Potential hazard of glass particles if lamp has ruptured. Please have Sharp Authorized LCD Projector Dealer or Service Center replace lamp if rupture occurs.

See “Replacing the Projection Lamp” on page 37.

95˚F

 

 

(+35˚C)

 

 

41˚F

 

 

(+5˚C)

PG-M1

0X

 

 

PG-M1

0X

 

PG-M1

0X

 

Cautions Concerning the Setup of the Projector

For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. If the projector is used in these environments, the lens will need to be cleaned more often, and internal cleaning may become necessary. As long as the projector is regularly cleaned, use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized LCD Projector Dealer or Service Center.

Notes on Operation

The three marks shown on the left are caution labels for parts of the projector that emit intense heat during operation.

The cooling fan (exhaust vent), the lamp cage cover and adjacent areas may be extremely hot during projector operation. To prevent injury, do not touch these areas until they have sufficiently cooled.

Allow at least 10 cm (3 15/16 inches) of space between the cooling fan (exhaust vents) and the nearest wall or obstruction.

If the cooling fan becomes obstructed, a protection device will automatically turn off the projector lamp. This does not indicate a malfunction. Remove the projector power cord from the wall outlet and wait until the projector has sufficiently cooled. Then turn on the power by plugging the power cord back in. This will return the projector to the normal operating condition.

Cautions Concerning the Setup of the ProjectorFor SHARP Assistance (U.S.A. only)

If you encounter any problems during setup or operation of this projector, first refer to the “Troubleshooting” section on page

35.If this operation manual does not answer your question, please call toll free 1-888-GO-SHARP (1-888-467-4277) for further assistance. Or, send us an e-mail at lcdsupport@sharplcd.com.

Our World Wide Web address is http://www.sharp-usa.com/.

Notes on OperationFor SHARP Assistance (U.S.A. only) 6

Page 1
Image 1
Sharp BQC-PGM10X//1 operation manual Usage Guidelines, For SHARP Assistance U.S.A. only, Caution Concerning the Lamp Unit