Recording on a cassette tape (continued)
Tape Recording
To perform programmed recording:
1Program discs and tracks. (See page 20.)
2Press the 
button.
3Press the 
(TAPE 
).
To stop recording:
Press the 
(TAPE 
) button.
The CD and tape will stop.
Recording from the radio
1Tune in to the desired station. (See page 21.)
2Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3Press the 
button.
Recording will be paused.
4Press the 
(TAPE 
) button to start recording.
To interrupt recording:
Press the 
button.
To resume recording, press the 
(TAPE 
) button.
To stop recording:
Press the 
(TAPE 
) button.
Note:
If you hear a whistling noise while recording an AM station, move the AM loop antenna.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1Press the
2Load a prerecorded cassette
into the TAPE 1 cassette com- partment. Insert a blank tape into the TAPE 2 cassette com- partment.
It is recommended that the recording tape is the same length as the master tape.
3Press the TAPE (1 
2) button until "TAPE 1" appears on the display.
4Press the 
button.
Recording will be paused.
5Press the 
(TAPE 
) button to start dubbing.
To stop dubbing:
Press the 
(TAPE 
) button.
TAPE 1 and TAPE 2 will simultaneously stop.
Erasing recorded tapes
1Load the tape to be erased into the TAPE 2 cassette compartment with the side to be erased facing toward you.
2Press the TAPE (1 
2) button until "TAPE 2" appears on the display.
3Press the 
button.
4Press the 
(TAPE 
) button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
26