Sharp CD-G15000, CP-G15000 Memorizing a station, To recall a memorized station, To scan the preset stations, To erase entire preset memory, Listening to the radio (continued), Note:

CD-G15000 CP-G15000

Listening to the radio (continued)

Radio

Memorizing a station

You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning)

1Perform steps 1 - 3 in "Tuning" on page 31.

2Press the MEMORY button to enter the preset tuning sav- ing mode.

3Within 30 seconds, press the PRESET ( or ) button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

4Within 30 seconds, press the MEMORY button to store that station in memory.

If the "MEMORY" and preset number indicators go out before the station is memorized, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a preset station.

When a new station is stored in memory, the station previously memorized for that preset channel number will be erased.

Note:

The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord become disconnected.

To recall a memorized station

Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station.

To scan the preset stations

The stations saved in memory can be scanned automatically. (Preset memory scan)

1Press the PRESET ( or ) button for more than 0.5 seconds. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.

2Press the PRESET ( or ) button again when the desired station is located.

To erase entire preset memory

1Press the ON/STAND-BY button to enter the power standby mode.

2While pressing down thebutton and the button, press the TUNER(BAND) button until "TUNER CL" appears.

32