31
CD-MPS66
CD-MPS600
Tape Recording
Recording from several discs continuously:
To perform programmed recording:
To st op re cor din g:
Press the button.
The disc and tape will stop.
!Recording from the radio
To interrupt recording:
Press the button.
To resume recording, press the / button.
To st op re cor din g:
Press the button.
Note:
If you hear a whistling noise while recording an AM station, move
the AM loop antenna.
!Dubbing from tape to tape
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
!Erasing recorded tapes
1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2 Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
3 Press the button.
4 Press the / button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
1 Perform steps 1 - 5 in "Recording from a CD or MP3 disc" on page
30.
2 Within 5 seconds, press the / .
1 Program discs and tracks. (See page 21, 25.)
2 Press the button.
3 Press the / .
1Tune in to the desired station. (See page 26.)
2Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3Press the button.
Recording will be paused.
4Press the / butt on to start recording.
1Press the ON/STAND-BY button to turn the power on.
2Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
4Press the button.
Recording will be paused.
5Press the / butto n to start dubbing.
You can record from TAPE 1 to TAPE 2.