Antenna connection

Supplied FM antenna:

Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received.

Supplied AM loop antenna:

Connect the AM loop antenna to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop antenna

on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

FM

AM loop

antenna

antenna

CD-MPX850

Speaker Light-Up connection

1.Connect the speaker light-up wires to the SPEAKERS LIGHT-UP jacks for speaker illumination. To turn off the speaker light-up feature, press the CLEAR/DIMMER button on the remote control for 2 seconds or more.

LEFT SPEAKER RIGHT SPEAKER

Use

Note:

Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception.

Installing the AM loop antenna:

< Assembling >

< Attaching to the wall >

 

Wall Screws (not supplied)

Speaker connection

Connect the black wire to the FRONT SPEAKERS minus (-) terminal, and the red wire to the FRONT SPEAKERS plus (+) terminal.

Red

Black

Note:

for

Placing the right speaker light-up wire to the RIGHT jack and the left

speaker light-up wire to the LEFT jack.

Preparation

Caution:

Use speakers with an impedance of 6 ohms or more, as lower

impedance speakers can damage the unit.

Do not mistake the right and the left

 

 

 

 

 

 

 

channels. The right speaker is the one on the

 

 

 

 

right side when you face the unit.

 

 

 

 

 

 

 

 

Do not let the bare speaker wires touch

 

 

 

 

 

 

 

 

 

each other.

 

 

 

 

 

Do not stand or sit on the speakers. You may

 

 

 

 

 

 

 

 

 

 

be injured.

 

 

 

 

 

 

 

 

 

 

Do not allow any objects to fall into or to be

 

 

 

 

 

placed in the bass reflex duct.

 

 

 

 

 

 

 

 

 

 

 

 

Incorrect

 

11