PAPER ROLL REPLACEMENT
1.Lift the paper holder up. (Fig. 1)
2.Fold the leading edge of the paper roll 3 to 5 cm. (Do not fold it slantwise.) (Fig. 2)
3.Insert the paper roll from the left side of the paper holder and make sure the paper roll is set in the proper direction (with the paper feeding from the bottom). (Fig. 3)
4.Insert the leading edge of the paper into the opening directly behind the print mechanism. (Fig. 4)
5.Press the paper feed key and feed the paper under the edge of the paper cutter. (Fig. 5)
Paper holder
3 cm – 5 cm
Fig. 1 | Fig. 2 |
Fig. 3
Paper cutter
Fig. 4
Fig. 5
DO NOT PULL THE PAPER BACKWARDS AS THIS MAY DAMAGE THE PRINTER MECHANISM.
– 8 –
