13
2011 October 4 DK-CL8PH ENAUS_A6_p01-p20.fm
DK-CL8PH(BK)
DK-CL8PH(GR)
DK-CL8PH(PK)

Radio

Listening to the radio
Tuning
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING
( or )
button
again.
This product can receive FM Stereo amd FM Monaural broadcast.
Programming a station
You can store 40 FM stations in memory.
1Press the ON/STAND-BY button to turn the power on.
2Press the FUNC. button repeatedly to select the Tuner
function.
3Tune to the desired station.
Manual tuning:
Press the TUNING ( or ) button to tune into the
desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
TUNING
ALARM
RESET
ON/STAND-BY
1Perform steps 1 - 3 “Tuning” on page 13.
2Press the CLOCK/MEM. button for more than 2
seconds to enter the preset tuning saving mode.
3Within 30 seconds, press the or button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4Within 30 seconds, press the CLOCK/MEM. button to
store that station in memory.
If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.
5Repeat steps 1 - 4 to set other stations, or to change
a preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number
will be erased.
MON
MON MON