Specifications

Product type

Projector

 

Model

DT-100

 

Video system

NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/

 

DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50

Display method

Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments

DMD panel

Panel size: 0.53", 1chip DMD

 

No. of dots: 409,920 dots (854 [H] ⋅ 480 [V])

Lens

1–1.15 ⋅ zoom lens, F2.4–2.6, f = 19.0–21.9 mm

Projection lamp

275 W DC lamp

 

Component input signal

15-pin mini D-sub connector

(INPUT1/2)

Y: 1.0 Vp-p, sync negative, 75 Ω terminated

 

PB: 0.7 Vp-p, 75 Ω terminated

 

PR: 0.7 Vp-p, 75 Ω terminated

Horizontal resolution

520 TV lines (DTV720P)

Computer RGB input

15-pin mini D-sub connector

(INPUT 1/2)/output

RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated

(OUTPUT) signal

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)

 

VERTICAL SYNC. SIGNAL: Same as above

S-video input signal

4-pin mini DIN connector

(INPUT 3)

Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

 

C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated

Video input signal

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω

(INPUT 4)

terminated

 

Vertical frequency

45–85 Hz

 

Horizontal frequency

15–70 kHz

 

Pixel clock

12–108 MHz

 

Audio input signal

ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 kΩ (stereo)

Audio output signal

ø3.5 mm minijack: 0.5 Vrms, less than 2.2 kΩ

(AUDIO OUTPUT 1-4)

4 cm ⋅ 2.85 cm oval ⋅ 1

Speaker system

Rated voltage

AC 100–240 V

 

Input current

3.6 A

 

Rated frequency

50/60 Hz

 

Power consumption

350 W (Lamp Setting

“Bright”)/

 

305 W (Lamp Setting

“Eco + Quiet”) with AC 100 V

 

330 W (Lamp Setting

“Bright”)/

 

285 W (Lamp Setting

“Eco + Quiet”) with AC 240 V

Power consumption (standby) 4 W (AC 100 V) – 5 W (AC 240 V)

Heat dissipation

1,315 BTU/hour (Lamp Setting “Bright”)/

 

1,145 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 100 V

 

1,240 BTU/hour (Lamp Setting “Bright”)/

 

1,070 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V

Operating temperature

41°F to 95°F (+5°C to +35°C)

Storage temperature

–4°F to 140°F (–20°C to +60°C)

Cabinet

Plastic

 

I/R carrier frequency

38 kHz

 

Dimensions (approx.)

12 13/32" ⋅ 4 19/64" ⋅ 11 1/32" (315 (W) ⋅ 109 (H) ⋅ 280 (D) mm) (main body only)

 

12 13/32" ⋅ 4 47/64" ⋅ 11 37/64" (315 (W) ⋅ 120 (H) ⋅ 294 (D) mm) (including adjust-

 

ment foot and projecting parts)

Weight (approx.)

8.6 lbs. (3.9 kg)

 

Replacement parts

Remote control, Power cord for U.S. and Canada, etc., 3 RCA to 15-pin D-sub

 

adaptor, Operation manual

As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

Appendix

57