Sharp DT-300 Image Projection, Turning the Power off, trol or on the projector, 1 Press on the remote con

Image ProjectionTurning the Power off1 Press on the remote con-trol or on the projector,

then press or again while the confirmation message is displayed, to put the projector into the standby mode.

•A dimly-lit screen is displayed for a short time to reduce lamp damage.

Note

•If you accidentally pressed and do not want to put the projector into the standby mode, wait until the confirmation message disappears.

2 Unplug the power cord from the AC outlet after the cooling fan stops.

Info

•Do not unplug the power cord dur- ing projection or cooling fan opera- tion. This can cause damage due to the rise in internal temperature, as the cooling fan also stops.

•When connected to equipment such as an amplifier, be sure to turn off the power to the equipment con- nected first and then to the projec- tor.

-32

STANDBY button

STANDBY button

DT-300_E_p29_43.p65 Page 32 03.10.29, 2:42 PM Adobe PageMaker 6.5J/PPC