General Control

Make sure to enable the HDMI CEC when making HDMI connection.

To turn the power on

Plug the AC power cord into an AC outlet, the stand-by indicator turns red.

This unit will automatically power on if:

1.TV or similar component which supports HDMI CEC, is turned on.

2.audio signal is detected from Audio input.

The stand-by indicator turns blue.

Notes:

HDMI input will override the Audio input signal.

Audio input will function only when there is no signal from HDMI input.

Audio Return Channel (ARC) (Audio

Return Channel submenu)

The audio return channel (ARC) enables an HDMI ARC- capable TV to send the audio stream to the HDMI OUT jack of the receiver. To use this function, your TV must support the ARC.

Volume

Volume can only be controlled from your TV.

Power Off

This unit will automatically go to stand-by mode if:

1.TV or similar component which supports HDMI CEC, is turned off.

2.no signal from Audio input is detected after 1 minute.

E-13

Page 14
Image 14
Sharp HTSL70 General Control, To turn the power on, Audio Return Channel ARC Audio Return Channel submenu, Volume