Sharp IG-BC2J operation manual Troubleshooting, Problem, What To Do

TROUBLESHOOTING

Problem

The Plasmacluster Ion Generator does not work.

WHAT TO DO

•Is a Car Adapter connected properly? Please be connected definitely.

•Does not a fuse blow?

Replace with a new fuse. (See E-11)

Flashing

FILTER CLEAN

It is over the exchange period of Plasmacluster Ion Generating Unit.

Replace with new Plasmacluster Ion Generating

faster (red) UNIT

UNIT

Flashing (red) Flashing (blue)

UNIT

Flashing (blue)

Other indication.

A discontinuous noise is heard. A clicking or ticking sound comes from the unit.

The air flow decreases.

The discharged air has odor.

Unit. (See E-10)

Plasmacluster Ions are not released. Press the Mode Button and restart. Clean the electrode section of the unit. (See E-9)

Is the unit installed correclly?

Remove the unit, fully inserted again and press the Mode button.

Failure

Unplug and contact the store you purchased or Sharp Service Center.

•Clicking or ticking sounds may be audible when the unit is generating ions.

•Dust may block the filter, clean the filter. (See E-8)

•Wind quantity sometimes becomes strong during operation with LOW mode, to confirm the condition of ion be not abnormal.

•Filter is getting dirty. Clean the filter. (See E-8)

•The Plasmacluster Ion Generator releases a small trace of ozone which may produce odor. This is not detrimental to health.

E-12