Sharp IG-BC2UB manuel dutilisation Troubleshooting, Problem, What To Do

TROUBLESHOOTING

Problem

The Plasmacluster Ion Generator does not work.

	FILTER
Flashing	CLEAN
	UNIT
faster (red)
UNIT
Flashing (red)	Flashing (blue)
UNIT
	Flashing (blue)

Other indication

A discontinuous noise is heard. A clicking or ticking sound comes from the unit.

The air flow decreases.

The discharged air has odor.

WHAT TO DO

•Is the Car Adapter connected properly? Please be sure it is definitely connected.

•Does not a fuse blow?

Replace with a new fuse. (See E-15)

It is over the exchange period of Plasmacluster Ion Generating Unit.

Replace with new Plasmacluster Ion Generating Unit. (See E-14)

Plasmacluster Ions are not released. Press the Mode Button and restart.

Clean the electrode section of the unit. (See E-13)

Is the Plasmacluster Ion Generating Unit installed correctly? (See E-13,14)

Remove the unit, fully inserted again and press the Mode button.

Failure

Unplug and contact the store you purchased or Sharp Service Center.

•Clicking or ticking sounds may be audible when the unit is generating ions.

•Dust may block the filter, clean the filter. (See E-12)

•Wind quantity sometimes becomes strong during operation with LOW mode, to confirm the condition of ion be not abnormal.

•Filter is getting dirty. Clean the filter. (See E-12)

•The Plasmacluster Ion Generator releases a small trace of ozone which may produce odor. This is not detrimental to health.

E-16