before operating
| 2:40 PM | DEC 22 |
Convection | Reheat |
|
Bake | Defrost | |
Broil | Micro Cook | |
Touch Microwave Drawer pad to view Microwave Drawer Home Page.
Touch Lower Oven pad
to view Lower Oven Home Page.
Before operating your new range make sure you read and understand this operation manual completely.
• Before the range can be used, follow these steps:
1Plug in the range. The display will read, “Please wait 30 seconds”. After 30 seconds, you can select either Video Demo or Set Clock.
2Touch Set Clock and follow the instructions below.
Note:
•If no choice is made for 30 seconds, the Video Demo will begin automatically. To cancel the Video Demo, Touch the Stop/Clear pad and the display will return to the Home Screen. To set the clock, touch the Setup pad, touch Clock and follow the directions on the touchscreen.
TO SET date and time
1After touching Set Clock or Clock, enter the correct month by touching Month repeatedly. The month appears in the banner at the top of the display. When set for the correct month, touch ENTER.
3Enter the time by touching the number pads. Select AM/PM and then touch ENTER.
Note:
2Enter the date by touching the number pads on the control panel. Example: for June 1, touch 01. Check the date in the banner, then touch ENTER.
4The month, date and time will appear in the banner. The display will return to the Home Screen.
•If you make a mistake while setting the clock, touch Stop/Clear pad. The Home Screen will appear. To set clock again, touch Setup pad on the control panel. Then touch Clock and follow the directions.
•If you want to change the setting of the time of day, Touch Setup pad and follow the directions.
•If the electrical power supply to your range should be interrupted, the screen will intermittently show Video Demo or Set Clock after the power is reinstated. If this occurs during cooking, the program will be erased. Simply touch Set Clock and follow the directions.
13