Cooktop Use

COOKTOP

warm zone

 

RADIANT

 

 

RADIANT

 

SURFACE UNIT

 

 

SURFACE UNIT

 

 

Cooktop-ON

 

Cooktop-ON

 

indicator light

indicator light

 

 

RADIANT

 

RADIANT

SURFACE UNIT

 

SURFACE UNIT

 

 

 

CONTROL PANEL

cooktop warm ZONE-ON indicator LIGHT

Radiant SURFACE Units

Surface units are turned on and adjusted using the control knobs.

How To set Single surface unit

1Place correctly sized cookware on the radiant surface unit.

2Push the knob in and turn in either direction to the desired heat setting.

3When cooking is completed, turn the knob to OFF. Remove pan.

How To set dual surface unit

The right front surface unit has 2 cooking sizes so that you can choose either to match the diameter of the cookware you are using.

1Place correct size cookware on the radiant surface unit.

2To use the small surface unit, push the knob in and turn it to the left, counter clockwise.

To use the large surface unit, push the knob in and turn it to the right, clockwise.

3 When cooking is completed, turn the knob to OFF. Remove pan.

Note for surface unit: A hot surface indicator light in the center of the cooktop will glow when a radiant unit is turned on. It will remain on until the surface is cooled to about 150˚F. Be sure the knob is turned to OFF when you have finished cooking.

The glass ceramic cooktop retains heat after the radiant surface units have been turned to OFF. If possible, turn the units off and allow foods to finish cooking with the retained heat. It may be necessary to remove the pan from the unit to prevent further cooking, also.

Suggested heat settings

Setting

Type of cooking

 

 

 

 

High

Bring liquid to a boil. Always reduce

 

setting to a lower heat when liquids

 

begin to boil or foods begin to cook.

Medium High

Brown meat, heat oil for deep fat frying

 

 

or to continue a rapid boil.

Medium

Maintain a slow boil, thicken sauces

 

 

and gravies

Medium Low

Continue cooking covered foods or

 

 

steam foods.

Low

Melt or simmer.

 

Note: The size and type of cookware used will influence the setting needed.

COOKTOP WARM ZONE

The Cooktop Warm Zone will keep hot cooked food at an ideal serving temperature. To turn Cooktop Warm on, touch the Cooktop Warm pad, then touch number 0 within 3 seconds. The red indicator will light. To turn the Cooking Warm Zone off, touch the Cooktop Warm pad.

CAUTION The Cooktop Warm Zone will not glow red when it is hot, but it does become hot enough to cause burns. Always use oven mittens when removing food from the Warm Zone as cookware and plates will be hot. Use only cookware recommended for top-of-range cooking. Do not use plastic wrap to cover foods. Plastic may melt on to the surface and be very difficult to clean.

15