18
Basic Operation (Continued)
Changing Channels
You can select channels using Channel Select or
CH ( )/( ).
• This LCD TV set allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2- or 3-digit number.
■Using Channel Select
When selecting the channel using Channel Select, complete
input of the channel number by holding down the button for
the last digit for a moment.
To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
Press the button. Press the button.
0–
5
A
• When selecting a 1-digit channel number, do not fail to press the
button first.
To select a 3-digit channel number (e.g., Channel 115):
Complete the following procedure within 4 seconds.
Press the button. Press the button.
1–– 11–
Press the button.
115
A
• The 3-digit channel number can be selected only when the
receiving mode is set to CABLE in CH-SETTING. (For details on
setting the receiving mode, see page 26.)
Changing channels with CH ( )/( ) on the remote control
Air:
Press CH ( )and the channels change in the order shown below:
2A3A. . . A68A69 A2A3A. . .
Press CH ( )and the channels change in the order shown below:
3A2A69 A68 A. . . A3A2A. . .
Cable: Press CH ( )and the channels change in the order shown below:
1A2A3A. . . A125A1A2A 3 A . . .
Press CH ( )and the channels change in the order shown below:
3A2A1A125 A. . . A3A2A1A. . .
■Using FLASHBACK
●Press FLASHBACK to switch the currently tuned channel
to the previously tuned channel.
●Press FLASHBACK again to switch back to the currently
tuned channel.
Sound Volume
■To adjust the volume
●Press VOL (+) to increase the sound volume.
The bar indicator shifts right.
VOLUME
50
●Press VOL (–) to decrease the sound volume.
The bar indicator shifts left.
VOLUME
10
■To mute the sound
●Press MUTE to temporarily turn off the sound.
The MUTE mark is displayed for 4 seconds.
●Press MUTE or VOL (+)/(–) to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed: POWER, MUTE,
VOL (+)/(–) or MTS.
VOLUME
10
A
•When VOL (+)/(–) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
•The Mute function is cancelled when POWER is pressed.
■To select MTS (Multichannel TV Sound)
Press MTS to display the MTS screen.
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP: secondary audio program
MONO: monophonic audio
STEREO
<
ON AI R
<
ON AI R
SAP
M
ONO
A
•“ON AIR” appears when a STEREO or SAP broadcast is being
aired.
1
2
1
3
1 2
2