Sharp LC-15B8U-S ■Activating V-CHIPBLOCK, ■Changing V-CHIPBLOCK settings, ■Changing or clearing the SECRET NUMBER

Useful Features (Continued)

■Activating V-CHIP BLOCK

●Setting STATUS

You can activate V-CHIP BLOCK after setting V-CHIP.

1	Repeat steps 1 to 4 of Setting V-CHIPon page 25.
	Repeat steps 1 to 4 of Setting V-CHIPon page 25.

2	Press '/" to select “STATUS”, and press ENTER.

	M P A A
	T V G U I D E L I N E S
	C A N . E N G L I S H R A T I N G S
	C A N . F R E N C H R A T I N G S
	S T A T U S
3
3	Press '/" to select “ON”, and press ENTER.


		O N

		O F F

•If “STATUS” is set to “OFF”, V-CHIP BLOCK will not be activated.

4 Press MENU to exit.

■Canceling the V-CHIP BLOCK screen while V-CHIP BLOCK is activated

1“V-CHIP HAS BEEN ACTIVATED” appears if you watch a program with the same Program Rating data you configured.

V – C H I P H A S B E E N A C T I V A T E D

T V – 1 4

D L S V

•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if “STATUS” is set to “OFF”.

■Changing V-CHIP BLOCK settings

1Repeat steps 1 to 3 of Setting V-CHIPon page 25, then “INPUT SECRET NO.” will be displayed.

–– – –

2Input the 4-digit secret number by using Channel Select; the V-CHIP select mode will be displayed. Set the V-CHIP BLOCK again.

M P A A

T V G U I D E L I N E S

C A N . E N G L I S H R A T I N G S

C A N . F R E N C H R A T I N G S

S T A T U S

■Changing or clearing the SECRET NUMBER

If you forget the secret number, clear the secret number as follows.

Upper control panel of the main unit

CH ()

VOL (+)

1 Repeat steps 1 to 3 of Setting V-CHIPon page 25, or

1and 2 of Canceling the V-CHIP BLOCK screen while V-CHIP BLOCK is activated, then “INPUT SECRET NO.” will be displayed.

2	Press and hold both CH ( ) and VOL (+) on the main
	unit simultaneously until the message “INPUT SECRET
3	NO.” blinks.
3	Press MENU to exit.

Press MENU to display “INPUT SECRET NO.”.

– – – –

Input the 4-digit secret number by using Channel Select; V-CHIP BLOCK is temporarily canceled. If you input an incorrect secret number, “SECRET NO. IS INCORRECT.” is displayed. In this case, input the correct secret number.