Sharp LC-20SH7U 5TV Screen Display Mode, 5Sleep Timer, [ZOOM], [SLEEP], [SLEEP], 4:3WIDE, [VIEW MODE], [LETTERBOX], LETTERBOXZOOM, To Cancel the Sleep Timer

WATCHING TV

5TV Screen Display Mode

DTV

2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal.

Press [VIEW MODE] repeatedly to switch the TV aspect ratio.

VIEW MODE

LETTERBOXZOOM[LETTERBOX]

Display the digital-supported program in full-screen. Black borders will spread in the upper and lower screen.

[ZOOM]Enlarge and display the center area of the digital- supported program.The right and left side of image will be cut off.

Note:

•You may not switch the display mode depending on the program.

•In “INPUT 2” of the external input mode, you can also select the display mode either “4:3 (normal)” or “WIDE” when the connected external device outputs 480p video signal and the following is displayed on the TV screen.

INPUT 2 480P

Select “WIDE” accordingly if your DVD video is recorded as anamorphic widescreen.

5Sleep Timer

The sleep timer can be set to automatically turn off the unit after an incremental period of time.

1Press [SLEEP] to set the sleep timer.

SLEEP

SLEEP OFF

• Sleep timer display appears on the TV screen.2Press [SLEEP] repeatedly to change the amount of time until shut off.

SLEEP

SLEEP 120MIN.

•You can set your unit to turn off after a set period of time (from 30 to 150 minutes).

•Each press of [SLEEP] will increase the time by 30 minutes.

•After set up, the sleep timer display can be called up for checking by pressing [SLEEP].

To Cancel the Sleep TimerPress [SLEEP] repeatedly until “SLEEP OFF“ is displayed on the TV screen.

Note:

•The sleep timer setting display will automatically disappear in 10 seconds.

•When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

4:3WIDE