Basic Operation
Turning on POWER
■ Press POWER, located on the front side of the main |
| |
Control section of main unit | ||
unit. | ||
|
■When the Power indicator is red, press the POWER ON/OFF on the remote control to turn on the monitor. The Power indicator changes from red to green.
▼Screen (Video 1 mode)
AV1
PAL
1Input mode indica- tion disappears after three seconds.
MENU | − | VOL | + | SELECT | AV INPUT | POWER | POWER |
HEAD |
|
|
|
|
|
|
|
PHONE |
|
|
|
|
|
|
|
|
|
|
|
| Press | Power | |
|
|
|
|
| indicator |
Switching AV INPUT AV1/AV2/COMPONENT/RGB
ON/OFF
MUTE
AV INPUT | MENU |
| |
SELECT |
|
VOL | VOL |
– | + |
SELECT |
|
■Turn on the power of the connected video equipment.
■Press AV INPUT and select the applicable input source. The screen displays AV1, AV2, COMPONENT or RGB at the upper right corner each time AV INPUT is pressed.
Note
1.AV input mode indication remains for three seconds.
2.To change the AV input mode, press AV INPUT while the AV input mode is displayed (within 3 seconds).
◆AV1: Video equipment connected to the AV1 input terminals.
◆AV2: Video equipment connected to the AV2 input terminals.
◆COMPONENT: Video equipment connected to the component input terminals.
◆RGB: Personal computer connected to the RGB input terminal.
■Each time AV INPUT is pressed, the indication at the upper right corner on the screen changes in the following order.
▼Screen
Initial mode (AV1) | AV1 mode | AV2 mode | COMPONENT mode | RGB mode |
AV INPUT
*1st push: Displays the current AV input mode
AV1
PAL
AV2 COMPONENT
PAL
RGB
■When the AV2 output function is in use, the mode switches among COMPONENT, RGB and AV1.
Note
The contents displayed on the screen differ according to the contents of the input signal.
US 10