3
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1Confi rm the screws supplied with the TV.
Screw driver
Screw
Soft cushion
Screws (m3)
(used in step 3)
2Insert the stand base to the stand post on the
bottom of the TV. (1)
3Insert and tighten the 3 screws into the 3 holes
on the bottom of the stand base. (2)
NOTE
• To detach the stand, perform the steps in reverse order.
Setting the TV
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Room antenna terminal
(75-ohm type)
Antenna cable
(commercially available)
To antenna
terminal
To AC INPUT
terminal
Connecting the AC cord
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
LC22LE520X_EN.indb 3LC22LE520X_EN.indb 3 11/24/2010 4:31:48 PM11/24/2010 4:31:48 PM