10
Setup menu
Channels
Video Audio TV Setup Parental
Normal
On
O
Disable
Screen Mode
DPMS
Blue Mute
No signal o
30min.
No operation o
Auto
Time Setup
Input Select
O
PAP/PIP
EnglishOSD Language
NOTE
• The displayed menu items in Setup menu are different,
depending on the input or signal source.
H OSD Language
Select from among 4 languages: English, Simplifi ed
Chinese, Persian and Arabic.
H Screen Mode
You can select different picture sizes that account for
the kind of each picture.
1Press WIDE.
• The SCREEN MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
2Press WIDE or c/d while the Screen Mode
menu displays on the screen.
• As you toggle down the options, each mode is
immediately refl ected on the TV.
Selected item Description
Full Full screen for both 4:3 and 16:9 pictures.
Normal Available for 4:3 pictures only. A side bar
appears on each side.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
Auto
Automatically adjusts the picture size.
4:3 picture on “Panorama” 4:3 picture on “Normal”
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
H PAP/PIP
You can display dual pictures on the screen at one
time. You can select either dual picture mode the “PAP”
(Picture And Picture) or “PIP” (Picture In Picture).
H DPMS (Display Power Management Signals)
You can set the TV to automatically power off when no
image is displayed on PC. (On, Off)
If no signal inputs for approximately 40 seconds, the
power off.
When you start using the PC and the signal inputs
again, the TV turns on.
TV menu (Continued)

Analogue Channel Fine Tune

You can adjust the frequency to your desired position.
1Go to “MENU” > “TV” > “Channels” >
“Analogue Channel Fine Tune”, and then press
ENTER.
2Press a/b to select the channel you want
to fi ne tune, and then press ENTER.
3Adjust the frequency by pressing c/d
while checking the background picture as a
reference, and then press ENTER to set.
NOTE
• Analogue Channel Fine Tune is grayed out and unselectable
in DTV mode.

Clear Channel List

Channel list will be reset to clear.
1Go to “MENU” > “TV” > “Channels” > “Clear
Channel List”, and then press ENTER.
2Press c/d to select “OK”, and then press
ENTER.

Colour System (ATV only)

You can change the colour system to one that is
compatible with the image on the screen.
1Go to “MENU” > “TV” > “Channels”> “Channel
Scan”, and then press ENTER.
2Press a/b to select “Colour System”.
3Press c/d to select the optimum colour
system to receive. (Auto, PAL, SECAM,
NTSC3.58, NTSC4.43, PAL-60)
4Press ENTER.
5Press c/d to select “OK”, and then press
ENTER.
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g. PAL, NTSC4.43).
LC24LE430X_EN.indb 10LC24LE430X_EN.indb 10 7/19/2011 9:38:13 AM7/19/2011 9:38:13 AM