Recording Configuration
Select Recording Configuration item in the Settings menu to configure recording settings. The following menu is displayed for recording configuration.
The following options are available for adjustments:
Start Early (*)
You set recording timer’s starting time to start earlier by using this setting.
(*)Available only for EU country options. End Late (*)
You set recording timer’s end time to end later by using this settings.
(*)Available only for EU country options. Max Timeshift
This setting allows you to set the maximum time allowed for timeshifting. Duration options are approximate and can change accordingly, depending on the broadcast received.
Format Disk
IMPORTANT: Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 if you activate this feature.
•If you want to delete all files on the connected USB hard disk drive or memory stick, you can use Format Disk option.
•Also, if your USB disk malfunctions, you can try formatting the USB disk. In most cases formatting the USB disk will restore normal operation; however, ALL the data stored on the USB disk will be lost in such a case.
•Press OK button while the Format Disk option is highlighted. A menu will appear on the screen, requiring you to enter a pin number. If you have not changed the pin number, the factory default is 0000.
Note: If the Country option is set to France, you can use 4725 as the default code.
After you enter the pin, a
you back up important recordings before you format the USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight Hard Disk Info by using “
” or “
” key and press OK. USB disk information will be displayed:
Configuring Date/Time Settings
Select Date/Time in the Settings menu to configure Date/Time settings. Press OK button.
• Use “
” or “
” buttons to highlight Date/Time.
Date,Time,Time Settings Mode and Time Zone Setting will be available.
Use “
” or “
” buttons to highlight the Time Settings Mode. Time Settings Mode is set using “
” or “
” buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone can be altered:
•By pressing “
” or “
” buttons select Time Zone.
Use “
” or “
” buttons to change the Time Zone between
•Changes are automatically stored. Press “MENU” to exit.
Configuring Source Settings
You can enables or disable selected source options. The TV will not switch to the disabled source options when “SOURCE” button is pressed.
English - 30 -
A01_MB61_[GB]_1910UK_IDTV_TC_PVR_BRONZE16_32942LED_100Hz | _ | ROCKER_10072539_50185773.indd 30 | 21.07.2011 14:30:28 |
|
|
|
|
