Useful adjustment settings

Auto Sync. adjustment (for Analog PC input mode only)

For automatically adjusting the PC image.

1Press MENU to display the MENU screen, and then press c/d to select “Setup”.

2Press a/b to select “Auto Sync.”, and then press ENTER.

Press c/d to select “Yes”, and then press

3ENTER.

•Auto Sync. starts and “Now adjusting the image.” displays.

Fine Sync. adjustment

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.

1Press MENU to display the MENU screen, and then press c/d to select “Setup”.

2Press a/b to select “Fine Sync.”, and then press ENTER.

Press a/b to select the specifi c adjustment

3item.

 

 

 

 

 

 

Yes

 

No

 

 

 

 

 

 

 

 

 

 

 

30%

4Press MENU to exit.

NOTE

•When Auto Sync. is successful, “Completed” displays. If not, Auto Sync. failed.

•Auto Sync. may fail even if “Completed” displays.

•Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync.

•Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

•It is not necessary to use “Auto Sync.” when a digital signal is being input, so it cannot be selected.

 

 

 

 

 

 

 

 

 

H-Pos.

[ 90]

a

 

 

b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V-Pos.

[ 39]

a

 

 

b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clock

[ 90]

a

 

 

b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Phase

[ 20]

a

 

 

b

 

 

 

 

 

 

 

 

 

 

Reset

 

 

 

 

 

 

 

 

 

 

 

 

 

Selected item

Description

 

 

H-Pos.

Centers the image by moving it to the left

 

or right.

 

 

V-Pos.

Centers the image by moving it up or

 

down.

 

 

Clock

Adjust when the image fl ickers with vertical

 

stripes.

 

 

Phase

Adjust when characters have low contrast

 

or when the image fl ickers.

 

 

4Press c/d to adjust the item to your desired position.

5Press MENU to exit.

NOTE

•For resetting all Fine Sync. adjustment items to the factory preset values, press a/b to select “Reset”, and then press ENTER.

•It is not necessary to adjust the “Clock” or “Phase” when a digital signal is being input, so it cannot be selected.

31