Sharp LC-37DW99U manual 33

Using external equipment

Displaying an image from HDMI equipment

1	To watch an HDMI equipment image, select
	INPUT4 or INPUT 5 from “INPUT SOURCE”
	menu using INPUT on the remote control unit
	or on the TV.
				INPUT SOURCE
					TV
					INPUT1
					INPUT2
					INPUT3
					INPUT4
					INPUT5
2	Press MENU to display the MENU screen, and
	then press c/d to select “Option”.
3	Press a/b to select “HDMI Setup”, and then
	press ENTER.
		Audio Only
		Digital Noise Reduction [Low]
		HDMI Setup
		Output Select				[Fixed]
4	Press a/b to select the desired item, and
	then press ENTER.
5	Press c/d to select the desired setting, and
	then press ENTER.
HDMI			Selectable
Setup						Description
			items
items
Auto View			Enable			Set whether or not to use
			Disable			View Mode based on signal
						recognition, including an HDMI
						signal.
Audio			Digital			Select “Digital” for an audio
Select			Analog			signal via the HDMI terminal.
						Select “Analog” for an audio
						signal via the R-AUDIO -L
						terminal.

6 Press MENU to exit.

NOTE

•Refer to your external equipment operation manual for the signal type.

•“Audio Select” is only available for INPUT 5.

•When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Input Skip

This setting allows you to skip the HDMI Input on the Input Selection operation.

1	Press MENU to display the MENU screen, and
	then press c/d to select “Setup”.
2	Press a/b to select “Input Skip”, and then
	press ENTER.
3	Press a/b to select the Input (INPUT 4 or
	INPUT 5) you wish to skip, and then press
	ENTER.
	Input 4 (HDMI)
	Input 5 (HDMI)
		Yes	No

4	Press c/d to select “Yes”, and then press
	ENTER.
5	Press MENU to exit.

31