Sharp LC-46LE832U, LC-52LE832U, LC-60LE832U Supplied Accessories, Attaching the Stand, LC-40LE832U

Supplied Accessories

Make sure the following accessories are provided with the product.

LC-46LE832U

LC-40LE832U LC-52LE832U LC-60LE832U

Remote control unit “AAA” size battery		Cable tie	Stand unit	Stand unit	Stand unit
(g1)	(g2)	(g1)	(g1)	(g1)	(g1)
Page 9	Page 10	Page 9	Page 7	Page 8	Page 8
■ Operation manual (g1)	■ Connection guide (g1)

• Always use the AC cord supplied with the TV.

• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.

QUICK REFERENCE

Attaching the Stand

•Before attaching (or detaching) the stand, unplug the AC cord.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

•Attach the stand in the correct direction.

•Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

■LC-40LE832U

1 Confi rm that there are 7 screws (3 long screws, 3 middle screws and 1 short screw) supplied with the stand unit.

2 Attach the supporting post for the stand unit onto the base as shown below.

•The supporting post attaches to the base at an off- centered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward.

4 Insert and tighten the 3 screws into the 3 holes on the rear of the stand unit.

Middle screws

2

Long screws

Forward 1

3 Insert the stand into the openings on the rear of the TV.

Soft cushion

5 1 Insert the stand cover.

2 Insert the screw to secure the stand cover.

Short screw

2

1

• To detach the stand, perform the steps in reverse order.

7