Useful adjustment settings
Input Label
Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display.
1 | Press | to select the desired input |
source. | INPUT | |
| ||
| Press | to display the MENU screen, |
2and then press c/d to select “Setup”.MENU
Press a/b to select “Input Label”, and then
3press ENTER.
Press a/b/c/d to select the new name for
4the input mode, and then press ENTER.
Example
INPUT SOURCE
TV
DVD
INPUT2
INPUT3
INPUT4
INPUT5
5Press MENU to exit.
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
Sleep Timer
Allows you to set a time when the TV automatically switches to standby.
Press .
1• The remaining time displays when the sleep timer has been set.SLEEP
Sleep Timer: Remaining | 30 |
Each time you press SLEEP, the remaining
2time switches as shown below.
•When set, the time automatically starts counting down.
•If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.
•Five minutes before the time expires, the remaining time displays every minute.
Off 30 60
120 90
NOTE
•Select “Off” by pressing SLEEP to cancel the sleep timer.
•The TV will enter the standby mode when the remaining time reaches zero.
•When the sleep timer is set, its indicator on the TV lights red.
32