Using external equipment

Displaying an image from HDMI equipment

To watch an HDMI equipment image,

1select “INPUT4” or “INPUT5” from “INPUT SOURCE” menu using INPUT on the remote control unit or on the TV.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

Press

to display the MENU screen,

2and then press c/d to select “Option”.MENU

Press a/b to select “HDMI Setup”, and then

3press ENTER.

Audio Only

 

Digital Noise Reduction

[Low]

 

 

 

 

HDMI Setup

 

 

 

Output Select

[Fixed]

 

 

Press a/b to select the desired item and

4press ENTER.

Press a/b/c/d to select the desired

5setting and press ENTER.

HDMI

Selectable

 

Setup

Description

items

items

 

 

 

Signal

RGB

Select the video signal type from

Type

YCbCr 4:4:4

the HDMI terminal.

 

YCbCr 4:2:2

 

 

 

 

Auto View

Enable

Set whether or not to use

 

Disable

View Mode based on signal

 

 

recognition, including an HDMI

 

 

signal.

 

 

 

Audio

Digital

Select “Digital” for an audio

Select

Analog

signal via the HDMI terminal.

 

 

Select “Analog” for an audio

 

 

signal via the R-AUDIO -L

 

 

terminal.

6Press MENU to exit.

NOTE

•Refer to your external equipment operation manual for the signal type.

•“Signal Type” is only available when an HDMI-DVI conversion cable is connected.

•“Audio Select” is only available for INPUT 4.

•When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Input Skip

This setting allows you to skip the HDMI Input on the Input Selection operation.

Press

to display the MENU screen,

1and then press c/d to select “Setup”.MENU

Press a/b to select “Input Skip”, and then

2press ENTER.

Press a/b to select the Input (INPUT 4 or

3INPUT 5) you wish to skip, and then press

ENTER.

Input 4 (HDMI)

Input 5 (HDMI)

YesNo

Press c/d to select “Yes”, and then press

4ENTER.

5Press MENU to exit.

30