Using external equipment
Displaying an external equipment image
To view external source images, select the input source from INPUT on the remote control unit or on the TV.
Input Select
If the image does not come in clearly from the external equipment connected to INPUT 1 or 2, you may need to change the input signal type setting on the “Input Select” menu.
Press | to display the MENU screen, |
1and then press c/d to select “Option”.MENU
Press a/b to select “Input Select”, and then
2press ENTER.
3Press a/b to select the signal type you want to set, and then press ENTER.
•If the selected signal type is incorrect, images are not displayed or displayed without any color.
Auto
COMPONENT
VIDEO
1Press INPUT.
• A list of selectable sources appears.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
Press INPUT again to select the input
2source.
•An image from the selected source automatically displays.
•Each time INPUT is pressed, the input source toggles.
•You can also select the input source by pressing a/b.
•If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.
NOTE
• See pages 13 and 14 for external equipment connection.
4Press MENU to exit.
•The setting is stored and can be selected on the “INPUT SOURCE” menu.
NOTE
•Refer to your external equipment operation manual for the signal type.
•If you set INPUT 1 and INPUT 2 to Auto, the TV will automatically select the input signal.
•Check the operation manual of the external equipment for the signal type.
•Setting INPUT 1 and INPUT 2 signal selection to “Auto” when other equipment is connected will result in the following connection priority.
INPUT 1 and INPUT 2:
1 COMPONENT VIDEO
2VIDEO
29