4 Press a/b to select the desired language listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your TV when selecting “Air” or “Cable”.
5 Press c/d to select “Air” or “Cable”. Press ENTER to enter the setting.
Channel search
Channel auto search makes the TV look for all channels viewable in the set area.
3
• If you already set the Secret No., go to step 3. If not, skip to step 4.
Input the 4-digit secret number by using 09.
press ENTER.
Press a/b to select “EZ Setup”, and then
1 Press MENU to display the MENU screen, and then press c/d to select “Setup”.
2
Basic adjustment settings
EZ Setup
You can run EZ Setup again, even after setting up the preset channels.
Language setting
Select from among 3 languages: English, French and Spanish.

6

When “Air” is selected in Antenna setting:

Press c/d to select “Start”, and then press

 

 

ENTER.

 

When “Cable” is selected in Antenna

 

setting:

 

Press a/b to select “Analog & Digital Search

 

Start” to search both analog and digital

 

broadcasts or “Analog Search Start” to search

 

only analog broadcasts, and then press

 

ENTER.

 

The Channel search will start automatically.

 

To exit the Channel search screen, select “Cancel”,

 

 

and then press ENTER.

7

Press MENU to exit.

 

NOTE

If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.

If you select “Analog Search Start” and initiate the channel search, the CH Memory for Cable Digital will be deleted.

Channel Setup

If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Antenna setting

1

Press MENU to display the MENU screen, and

then press c/d to select “Setup”.

 

2

Press a/b to select “CH Setup”, and then

press ENTER.

 

• If you already set the Secret No., input the 4-digit

 

secret number here. See page 41 for setting a

 

secret number.

3

Press a/b to select “Air/Cable”, and then

press ENTER.

 

4

Press c/d to select “Air” or “Cable”.

 

Press ENTER to enter the setting.

5

Press MENU to exit.

 

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

1

Repeat steps 1 and 2 in Antenna setting in

Channel Setup.

 

2

Press a/b to select “CH Search”, and then

press ENTER.

 

3

When “Air” is selected in Antenna setting:

Press c/d to select “Start”, and then press

 

 

ENTER.

 

When “Cable” is selected in Antenna

 

setting:

 

Press a/b to select “Analog & Digital Search

 

Start” to search both analog and digital

 

broadcasts or “Analog Search Start” to search

 

only analog broadcasts, and then press

 

ENTER.

 

The Channel search will start automatically.

 

To exit the Channel search screen, select “Cancel”,

 

 

and then press ENTER.

4

Press MENU to exit.

 

NOTE

If no channel is found, confi rm the type of connection made with your TV and try channel search again.

If you select “Analog Search Start” and initiate the channel search, the CH Memory for Cable Digital will be deleted.

23