Current 0
Max 0
Antenna Setup - DIGITAL
In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confi rm the antenna confi guration through the “Antenna Setup - DIGITAL” screen.
If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
Signal Strength
1 Press MENU to display the MENU screen, and then press c/d to select “Setup”.
2 Press a/b to select “Antenna Setup - DIGITAL”, and then press ENTER.
3 Press a/b to select “Signal Strength”.
• The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel.
Signal Strength
Channel Strength
Signal Strength

Basic adjustment settings

Channel memory setting

1

Press MENU to display the MENU screen, and

 

then press c/d to select “Setup”.

2

Press a/b to select “CH Setup”, and then

 

press ENTER.

 

• If you already set the Secret No., input the 4-digit

 

secret number here. See page 41 for setting a

 

secret number.

3

Press a/b to select “CH Memory”, and then

press ENTER.

4

Press a/b to select ANALOG (Air), ANALOG

 

(Cable), DIGITAL (Air) or DIGITAL (Cable), and

 

then press ENTER.

5

When viewing ANALOG broadcasts:

 

1 Press c/d to select the channel to skip,

 

and then press b to move down.

2 Press c/d to select “On”, and then press

ENTER.

When viewing DIGITAL broadcasts:

1 Press a/b to select the channel to skip, and then press c/d to select “On”.

•On: Skips channels. (Channel selection disabled using CH r/s.)

•Off: Does not skip channels. (Channel selection enabled using CH r/s.)

6 Press MENU to exit.

NOTE

• Make sure what kind of connection is made with your TV.

4 Press MENU to exit.

Channel Strength

The channel signal strength can also be checked separately.

1

Repeat steps 1 and 2 in Signal Strength in

 

Antenna Setup - DIGITAL.

 

 

 

 

2

Press a/b to select “Channel Strength”, and

 

then press ENTER.

 

 

 

 

3

Input the 2-digit channel number to check the

 

signal strength of the selected channel.

 

• Make sure the signal is strong enough for each

 

channel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal Strength

 

 

1

 

2 CH

 

Channel Strength

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal Strength

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current 0

 

 

Max 0

 

 

 

 

 

 

 

 

 

4 Press MENU to exit.

NOTE

• This function is available for DIGITAL (Air) only.

24