Supplied accessories

Make sure the following accessories are provided with the product.

Remote control unit

“AAA” size battery

AC cord

Cable clamp (g1)

Stand unit

Operation manual

(g1)

(g2)

(g1)

Cable tie (g1)

(g1)

(g1)

Page 8

Page 8

Page 7

Page 7

Page 6

 

NOTE

•Always use the AC cord supplied with the TV.

•AC cord enclosed in this product is for 110-125V. In using it on the 125-240V AC, please consult to the following.

SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP 6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A.

QUICK REFERENCE

Attaching the stand

•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

•Attach the stand in the correct direction.

•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

1

Confi rm that there are 8 screws (4 short

 

screws and 4 long screws) supplied with the

stand unit.

Attach the supporting post for the stand unit

2 onto the base using the box for the stand unit as shown below.

•The supporting post attaches to the base at an off-centered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward.

Hex key

Long screws

Forward

3

1 Insert the stand into the openings on the

 

bottom of the TV.

 

 

2 Insert and tighten the 4 short screws into

 

the 4 holes on the rear of the TV.

 

 

Hex key

 

 

2

Short screws

2

Soft cushion

1

1

NOTE

• To detach the stand, perform the steps in reverse order.

6