Power Control Menu
Power control setting allows you to save energy.
Example
Power Control
Power Saving | [Off] |
No Signal Off | [Disable] |
No Operation Off | [Disable] |
|
|
1Press MENU to display the MENU screen, and then press c/d to select "Power Control".
2Press a/b to select a specifi c adjustment item, and then press ENTER.
3Press a/b (or c/d) to select the desired setting, and then press ENTER.
4Press MENU to exit.
Power Saving
This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", "
" appears on the screen.
Advanced: Optimizes power reduction based upon video content and engages OPC. When set to "Advanced",
"
" appears on the screen. Off: This function does not work.
•"Power Saving" does not function when you set "AV MODE" to "DYNAMIC (Fixed)".
•You cannot select a different Power Saving item for each
AV MODE.
When “Power Saving” is set, the “OPC” settings for all AV Modes will automatically change.
•When "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "OPC" in the Picture menu screen.
•You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 17.)
No Signal Off
When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes.
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
•"Disable" is the factory preset value.
•When a TV program fi nishes, this function may not operate.
No Operation Off
When set to "Enable", the power will automatically shut down if there is no operation for 3 hours.
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
•"Disable" is the factory preset value.
Setup Menu
Example
Setup
EZ Setup
CH Setup
Antenna
Input Skip
Parental CTRL
Position
Language[English]
Reset
1Press MENU to display the MENU screen, and then press c/d to select "Setup".
2Press a/b to select a specifi c adjustment item, and then press ENTER.
•When you select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", you can enter the
3Press a/b (or c/d) to select the desired setting, and then press ENTER.
4Press MENU to exit.
EZ Setup
You can run EZ Setup again, even after setting up the preset channels.
Language: Select from among 3 languages (English, French and Spanish).
TV Location: Select "Home" or "Store" for the location where you plan to install the TV. This product qualifi es for ENERGY STAR V3.0 in Home mode default setting.
Home: “Power Saving” is set to "Advanced", and AV MODE is set to "STANDARD".
Store: “Power Saving” is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When “On” is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.
•ENERGY STAR qualifi cation is based on AV MODE "STANDARD".
Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all channels viewable in the set area.
•See "Initial Setup" on page 14 for setting each item.
•If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.
•If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.
23
